This liquid filling machine is a high-tech filling equipment controlled by microcomputer PLC programmable, and equipped with photo electricity instruction and pneumatic action.
It adopts servo control system, ensure the pistons can always reach constant position. When close to target filling capacity, the filling speed will automatically slow down, which can prevent the liquid spill out bottle mouth and cause pollution.
It is widely used in the below industry:
Plant oil:Lubricant oil, engine oil, gear oil, etc.
Daily Chemical products:Liquid soap,toilet cleaner, laundry detergent, kitchen detergent, fabric softener, hand sanitizer, alcohol gel, shampoo, hair lotion, body soap, etc.
Food industry:Tomato paste, chocolate butter, honey, edible cooking oil, mayonnaise, ketchup, jam, yogurt, etc.
Cosmetic:toner, lotion, cream, body milk, etc.
Our filling machine is easy to adjust, when you want to change the filling bottle size, just need to adjust the lifting rod, change the space between the filling nozzles and adjust the parameters on the touch screen.
| Model | PM-4A | PM-6A | PM-8A | PM-10A | PM-12A |
| Filling Head(PC) | 4 | 6 | 8 | 10 | 12 |
| Suitable volume(L) | 0.1-1 | 0.1-1 | 0.1-1 | 0.1-1 | 0.1-1 |
| Productivity (bph) | 700 | 1000 | 1500 | 2000 | 2500 |
| Work Pressure (MPa) | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 |
| Power consumption (KW) | 1.1 | 1.5 | 1.5 | 1.5 | 2.0 |
Electrical components
| ITEM | SUPPLIER | Brand | |
| 1 | Touch screen | Taiwan | WEINVEIW |
| 2 | PLC | Japan | Mitsubishi |
| 3 | Photo sensor for bottles | Japan | OPTEX |
| 4 | solenoid valve | Taiwan | SHAKO |
| 5 | Level button | Mexico | JOHNSON CONTROLS |
| 6 | angle seat Valve | Jointed | BURKERT |
| 7 | Diving cylinder | Taiwan | AIRTAC |
| 8 | Power button | France | Schneider |
| 9 | Button | France | Schneider |
| 10 | frequency converter | France | Schneider |
| 11 | Magnetic switch | Taiwan | AIRTAC |
| 12 | oil-water separator | Taiwan | SHAKO |
| 13 | Speed reducer | China | Jiao xing |
| 14 | Relay | Japan | Omron |
| 15 | Servo motor | Japan | Panasonic |
Electrical components of our automatic viscous liquid filling machine
| 1 | Servo motor | Panasonic | Japan |
| 2 | Touch Screen | WEINVEIW | Japan |
| 3 | PLC | Mitsubishi | Japan |
| 4 | Cylinder | AIRTAC | Taiwan |
| 5 | Solenoid Valve | SHAKO | Taiwan |
| 6 | Button | Schneider | France |
| 7 | Relay | Schneider | France |
| 8 | Sensor | Sick | Germany |
Suitable for material: daily chemical viscosity materials.
1.Accurate measurement: adopt servo control system, ensure the piston can always reaches constant position
2. Variable speed filling: in filling process, when close to target filling capacity can be applied to realize speed slow filling, prevent the liquid spill bottle mouth cause pollution
3. Convenient adjustment: replacement filling specifications only in touch screen can be changed in parameters, and all filling first change in position, fine-tuning dose it in touch screen adjustment Adopt servo motor to descend
4. Selecting the international famous brand electrical components configuration. Mitsubishi Japan PLC computer, omron photoelectric, Taiwan is produced touch screen, ensure the quality of its outstanding with long-term performance.
:suitable for disinfectant, bleach, etc.
suitable for 70% alcohol liquid, grease remover, air freshner, vinegar, coconut oil, liquid fertilizer, etc.
:suitable for producing PET hand sanitizer bottle, kitchen detergent bottle, edible oil bottle, cosmetic tonner, lotion bottle, etc.
:suitable for producing PE bottles for detergent, washing liquid, disinfectant, shampoo, etc.
Customized service
We can design the machines according your requirements(material,power,filling type,the kinds of the bottles,and so on),at the same time we will give you our professional suggestion,as you know,we have been in this industry for many years.After-sales service
1.We will delivery the machine and provide the bill of load on time to make sure you can get the machine quickly
2.When you finish the Preparation conditions,our fast and professional aftersales service engineer team will go to your factory to install the machine,give you the operating manual,and train your employee until they can operate the machine well.
3.We often ask feedback and offer help to our customer whose machine have been used in their factory for some time.
4.We provide one year warranty
5.Well-trained & experienced staff are to answer all your inquiries in English and Chinese
6.24 hours for engineer response (all services part 5days in customer hand by Intl' courier).
7.12 Months guarantee and life-long technical support.
8.Your business relationship with us will be confidential to any third party.
9.Good after-sale service offered, please get back to us if you got any questions.
Our factory was established in the year of 1998, with the long history of accumulated experience in filling machine industry in south Jiangsu. There are many development engineers of filling machine in our company. We devote ourselves to the development, research and production of liquid food and beverage packing and filling industry.
Besides, we have our own designs for the bottles.
Proman Machine cooperated with many customers in recent years, we win the trust of customers from our high-quality products. And we are looking forward to the future cooperation with you if our products can impress you deeply!
1.Where is your factory?
2.Do you have any technical supports with your Beverage Filling Machines?
Yes, We have a professional team of engineers who owned many installation, debug and training experiences abroad, are available to service machinery overseas.
3.What's your guarantee or the warranty of the quality if we buy your machines?
You're always welcome to visit our company. If you have any interest on our products. Please do not hesitate to contact us.